Ariosh offers design complimentary services to aid smooth implementation of Brownfield projects through engineering design phase. Service offerings include;

• Tie point Identification / Certification

Ariosh’s data specialists work closely with the design engineers to extract a certified tie point coordinate for each flow line connection point into the existing system. A standard form report is prepared (see Figure below) and a CAD model is optionally provided in the proper location and orientation to serve as a snap point for new pipe designs.

The tie point is extracted using our PRISM 3D™ software. PRISM 3D – winner of an R&D 100 award for innovation in 2005 – displays the facility digital database in an intuitive easy to use format so that data such as pipe centerlines can be extracted.

• Verification of Fabrication Isometrics

Ariosh converts Issue for Construction Drawings (Isometrics & Arrangements) to intelligent 3D Models. During the conversion all constructability issues will be identified and ISO’s errors will be completely identified. These models can then be used for clash checking/interference detection.

Clash Detection and Resolution


Ariosh will deliver significant value to you through clash detection and resolution. These two activities are very powerful for eliminating project design errors and Ariosh is an expert in detecting and correcting design errors, clashes, and missed tie points. As design models are completed, they are imported into PRISM 3D™ and are viewed alongside the digital models of the actual facility. All design elements are checked including piping, supports, equipment, and structure. All potential clashes are identified and resolved before fabrication begins. Demolition plans are prepared using the laser models as a visual cue.